Cellink BIO X 3D Bioprinter, Руководство пользователя, Страница: 55 / 75

6.1 General Terms and Conditions
3. SERVICE
Unless otherwise agreed in writing, Cellink shall be solely responsible for, and entitled
to, carry out after sales service and repairs on all Products.
4. GENERAL CONDITIONS OF DELIVERY
The Products shall be delivered from Cellink to the Buyer under the following delivery
terms:
(i) regarding new Products or Products returned after upgrading or repair -
CPT - Carriage Paid To (Incoterms 2010);
(ii) regarding Products returned after warranty actions - DAP - Delivered At
Place (Incoterms 2010).
Any delivery from Buyer to Cellink, e.g. of Products returned for repair
or calibration (whether under warranty terms or not), shall be delivered
DAP - Delivered At Place (Incoterms 2010).
Cellink reserves the right to make partial deliveries. Unless otherwise
agreed, invoices will be adjusted pro rata. For the purpose of these
terms any partial delivery will be regarded as filling a specific order.
5. ACCEPTANCE
The Buyer shall immediately following each delivery of any Product inspect the Product in
order to identify any external damage and to ensure that the delivery is in accordance with
the order. Any defects or deficiencies which are detected in conjunction with delivery shall
immediately be reported in writing to Cellink.
When a Product is unpacked, and in any event before the Product has been used by the Buyer,
the Buyer shall perform a full inspection of the Product where such was not possible on
receipt of the Product in question. The obligation to report any defects to Cellink as set out
in section below shall apply in such context.
At the request of Cellink, the Buyer shall make defective goods available to Cellink for
inspection and control.
If the Buyer does not report defects or deficiencies in Products delivered within the time
limits set out above, the Buyer shall have no right to make any claims against Cellink with
regard to the default or defect.