Cellink BIO X 3D Bioprinter, Руководство пользователя, Страница: 29 / 75

29
4.2 Bioprinting from a 3D model
Layer settings
In layer settings you can find different options regarding how the 3D model
is divided into layers and how BIO X should bioprint the model. You can choose
between BIO X’s predefined settings or create custom settings.
1. Preview – A preview of the chosen layer profile can be seen here.
2. Preview slider – Drag this to select which layer to preview.
3. Infill pattern – Tap to choose infill pattern.
4. Printhead use – Tap to select which part of the model each printhead
should bioprint.
5. Layer profile – Select one of the saved layer profiles or choose to create
a new one.
6. Infill density – Tap to select how dense the model should be (%).
7. Layer height – Tap to select layer height. CELLINK advises to use the
same layer height as the nozzle diameter.
1
3
2
4
5
6
7