Cellink BIO X 3D Bioprinter, Руководство пользователя, Страница: 23 / 75

23
4. Bioprinting with BIO X
Caution! Do not reach into the printchamber or look directly at the UV
lamp during the UV sterilization procedure. Doing so risks causing personal
injury!
Attention! The UV sterilization procedure will kill or damage any living organisms
inside the printchamber. Make sure to remove any of your cells or tissues from the
printchamber before initializing the UV sterilization procedure.
To ensure a sterile environment, BIO X is equipped with a UV sterilization system
which will create a sterile printchamber which is then maintained sterile by the Clean
Chamber Technology. CELLINK recommends running the UV sterilization procedure
before each bioprinting session.
To initialize the UV sterilization procedure, select ‘Clean chamber’ from the Home
screen and confirm.
4.1 Clean Chamber
3
2
1
1. UV Sterilization - Tap to start or abort the UV sterilization procedure.
2. Progress indicator.
3. HEPA filter fan - Tap to toggle the HEPA filter fan on/off (both during the
sterilization procedure and during a bioprinting process).
Sterilizing using UV-light