Cellink BIO X 3D Bioprinter, Руководство пользователя, Страница: 36 / 75

36
7
1
2
3
4
5
4.2 Bioprinting from a 3D model
Print model
This screen gives an overview of the bioprinting process. It will allow you to monitor
the activity of each printhead and curing module during the whole process.
1. Printhead 1 – Allows you to monitor the specific properties of printhead 1.
2. Printhead 2 - Allows you to monitor the specific properties of printhead 2.
3. Printhead 3 - Allows you to monitor the specific properties of printhead 3.
4. Left UV curing module – Allows you to monitor the specific properties of
the left UV curing module.
5. Right UV curing module – Allows you to monitor the specific properties
of the right UV curing module.
6. Z Offset - Adjust printbed position during printing.
7. Progress indicator – Allows for an overview of how far the bioprinting
process has come and how long it will take until it is completed.
8. Bioprint - Tap to start the bioprinting process.
Caution! Do not open the door without pausing the bioprinting process and
do not remove the printheads before the bioprinting process has completed.
Doing so risks aborting the process and you risk losing your cells!
6
8