Cellink BIO X 3D Bioprinter, Руководство пользователя, Страница: 34 / 75

34
4.2 Bioprinting from a 3D model
Overview and mounting of bioprinting equipment
When you have mounted all printheads, print surfaces and cartridges according to your
settings, simply tap ‘Bioprint’ and the bioprinting process will start.
When inserting your print surface, use the spring-loaded arms to securely fasten it
according to the figure below. If you are using a well plate, simply turn the arms to
the sides. Note! If you are using a well plate, ensure that the well plate has the outer
dimensions 128 x 85 mm.
Spring-loaded arms
When mounting the UV modules, be careful to mount them with the UV LED facing
down and the contact facing up (see below)!