CMW
070517
Page 18 | 1-855-235-5271
18.
Connect the green wire to the green wire, the black
wire to the black wire, and the white wire to the
white wire.
19.
Connect the end of the bottle probe cable to the
circular connector on the exterior of the electrical
box.
NOTE: The unit comes in black. The mounting bracket
and front grille are paintable, enabling you to match your
desired color.
20.
Connect the end of the display cable labeled
“UNIT” to the wire labeled “UNIT” coming from the
electrical box.
21.
Slide the electrical panel back into the evaporator
unit.
22.
Reinstall the top access panel and fasten the sixteen
(16) screws into place.
23.
Install the supplied three-inch pieces of cork tape
around the display cable, bottle probe cable, and
power wires.
UNIT
UNIT
