CellarCool 9000 TWIN-S Скачать руководство пользователя

Страница: 2 / 63

regard to the hardware and manual are subject to the restrictions and limitations imposed by the copyright laws of the

USA. Under copyright laws, this manual may not be copied, reproduced, translated, transmitted, or reduced to any printed

or electronic medium or to any machine-readable form, for any purpose, in whole or in part, without the written consent

of CellarCool.

Every effort has been made to ensure that the information in this manual is accurate. CellarCool is not responsible for

printing or clerical errors.

CellarCool reserves the right to make corrections or improvements to the information provided and to the related

hardware at any time, without notice.

Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a

recommendation. CellarCool assumes no liability with regard to the performance or use of these products.

We manufacture, test and certify 100% of our wine cooling units in

the USA. By sourcing the best components and closely controlling our

manufacturing processes, we can assure the highest-quality,

lowest defect manufacturing rates in the industry.

Conforms to ANSI/UL Std 427

Certified to CAN/CSA Std C22.2 No. 120

Содержание 9000 TWIN-S
































































Результаты поиска

Содержание 9000 TWIN-S

Отзывы:

Похожие инструкции для 9000 TWIN-S

Бренды по названию

Популярные бренды

CellarCool 9000 TWIN-S, Руководство техника

Результаты поиска

Содержание 9000 TWIN-S

Отзывы:

Похожие инструкции для 9000 TWIN-S

Бренды по названию

Популярные бренды