- 5 -
2-1-3. Power Module
2-1-4. Placement of Decals
1. Choose a flat surface to install the power module.
2. Use the power module as the template to locate and mark four mounting holes on the
mounting surface.
3. Secure the power module with the four #8 self-drilling screws supplied.
NOTE:
Always install the power module away from a heat source.
1. The controller is shipped without any button decals installed.
2. After assembling the controller and the mounting bracket, apply a desired decal above
each button to facilitate subsequent programming and operation.
3.21" (81.58mm)
1.64" (41.54mm)
2.07" (52.54mm)
8-R2.50
3.95" (100.33mm)
3.61" (91.63mm)
