- 4 -
2-1. Mounting
2-1-1. Screw Mount Bracket
2-1-2. Suction Cup Bracket
1. Choose a desired place for installation.
2. Use the base as the template to locate and mark two mounting holes on the mounting
surface.
3. Secure the bracket with the two Ø4 self-drilling screws supplied.
4. Assemble the controller with the bracket by tightening the knurled knob in a firm way.
5. Adjust the bracket at an angle most convenient to your operation.
1. Choose a desired place for installation.
2. Press the suction cup to install the controller on the windshield directly. Or assemble
the adhesive base at the bottom of the suction cup and follow the instructions below.
3. Mount the suction cup onto the mounting surface and allow the adhesive to set for at
least 24 hours.
4. Assemble the controller on the bracket by tightening the knurled knob in a firm way.
5. Adjust the bracket at an angle most convenient to your operation.
Chapter 2: Installationa
1.97" (50mm)
2.72" (69.2mm)
2-R4.5
1.97" (50mm)
