- 9 -
3-3. Default Configuration of Buttons
B1 = POSITIVE OUTPUT 1
ON/OFF switch
Activate B1 will activate the main warning light.
When B1 (main warning light) is interlocked by B2 (siren), it is possible to activate B1 by
pressing B2.
Also Input 3 can be connected to an external switch to activate B1 (main warning light) and
B2 (siren).
B1
B2
B3
B4
B5
B6
B7
B8
Enter Standby Mode Manually
(default configuration)
Manually enter Standby Mode by pressing B4 for more than 1 second.
It will turn off all button functions.
(Refer to 3-6 Programming Mode 2, p.19, for detailed information of Standby Mode Configu-
ration)
NOTE:
After entering Standby Mode, Programming Mode CANNOT be accessed by default.
If you want to enter Programming Mode, disconnect all power and reboot your SW833
Controller.
B1
B2
B3
B4
B5
B6
B7
B8
Standby
By default, red backlight will
flash to indicate under Stand-
by Mode.
3-2. Standby Mode
Enter Standby Mode Automatically
(default configuration)
Automatically enter Standby Mode after 15 minutes if no buttons are activated and Input 1 is
not activated either.
