- 16 -
B4 Setting
(B4 controls Positive Output 4 and Negative Output 2)
You can use B4 button as a switch that activates auxiliary devices or rear warning lights.
B5 Setting
(B5 controls Positive Output 5)
You can use B5 button as an ON/OFF switch that activates the traffic arrow function (warn-
ing/in-out mode). B5 may be set as the start button of Scene 1 to activate siren and all
connected warning lights simultaneously. You can also include B5 into Group 1 or Group 2
to activate traffic arrow function mutually exclusive.
Enter Programming Mode 1 and configure B4 Setting as the following table:
#
Indicator Light
Description
1
Permanent switch, activated upon the power is ON.
ON/OFF switch.
3
Momentary switch.
4
5
6
2
★
default
2
★
default
Connect Input 2 to handbrake.
B4 (rear warning light) can be activated automatically
only when Input 2 (handbrake) is ON and B1 (main
warning light) is activated. Under that circumstance, B4
can be turned on/off manually.
Include B5 into Group 1 button combo.
When B6, B7 and B8 are also included in Group 1,
B5, B6, B7 and B8 are mutually exclusive.
Include B5 into Group 2 button combo.
When B6, B7 and B8 are also included in Group 2,
B5, B6, B7 and B8 are mutually exclusive.
Set B5 as the start button of Scene 1. When B5 is
activated, B1, B2, B3 and B4 are activated simultane-
ously.
If B5 is the start button of Scene 1 and B6 is the start
button of Scene 2, B5 and B6 are mutually exclusive.
1. B1 and B4 are mutually exclusive.
2. B4 is not affected by Input 2.
When B6 is set as the start button of Scene 2,
activate B6 will also activate B1, B3, B4 simultaneously.
Enter Programming Mode 1 and configure B5 Setting as the following table:
#
Indicator Light
Description
1
Permanent switch, activated upon the power is ON.
ON/OFF switch.
3
Momentary switch.
6
4
5
