- 18 -
B7 Setting
(B7 controls Positive Output 7)
You can use B7 button as an ON/OFF switch that activates the traffic arrow function
(center-out mode). You can also include B7 into Group 1 / Group 2 / Group 3 to activate traffic
arrow function mutually exclusive.
Enter Programming Mode 1 and configure B7 Setting as the following table:
#
Indicator Light
Description
1
Permanent switch, activated upon the power is ON.
ON/OFF switch.
3
Momentary switch.
6
4
5
2
★
default
Include B7 into Group 1 button combo.
When B5, B6 and B8 are also included in Group 1,
B5, B6, B7 and B8 are mutually exclusive.
Include B7 into Group 2 button combo.
When B5, B6 and B8 are also included in Group 2,
B5, B6, B7 and B8 are mutually exclusive.
Include B7 into Group 3 button combo.
When B6 and B8 are also included in Group 3,
B6, B7 and B8 are mutually exclusive.
Enter Programming Mode 1 and configure B8 Setting as the following table:
B8 Setting
(B8 controls Positive Output 8)
You can use B8 button as an ON/OFF switch that activates the traffic arrow function (right-ar-
row mode). You can also include B8 into Group 1 / Group 2 / Group 3 to activate traffic arrow
function mutually exclusive.
#
Indicator Light
Description
1
Permanent switch, activated upon the power is ON.
ON/OFF switch.
3
Momentary switch.
4
5
6
2
★
default
Include B8 into Group 1 button combo.
When B5, B6 and B7 are also included in Group 1,
B5, B6, B7 and B8 are mutually exclusive.
Include B8 into Group 2 button combo.
When B5, B6 and B7 are also included in Group 2,
B5, B6, B7 and B8 are mutually exclusive.
Include B8 into Group 3 button combo.
When B6 and B7 are also included in Group 3,
B6, B7 and B8 are mutually exclusive.
