CEFLA NewTom 5G Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 110

CEFLA NewTom 5G Скачать руководство пользователя страница 23

3 Safety and maintenance of the device

✔

Regular maintenance

Regular maintenance is required to guarantee a proper working of the device and safety for the
patient, the user and other people.

The device maintenance and repair must be performed only by personnel that was directly
authorized by the manufacturer or the distributor. Every part of the system can only be tested and if
needed substituted by qualified personnel.

WARNING:

If the NewTom 5G unit has not been used to scan patients for
longer than three months, it will be necessary to perform a
beam forming procedure (for more details please contact the

Technical Support

)

✔

Dangerous cleaning substances

Some cleaning substances should be avoided to prevent damage to people and to the device
(See Par. 3.5 - “Cleaning and disinfection”).

✔

Preventive maintenance

Please periodically check the workstation-scanner, workstation-control box and control box
power supply cables. Also verify the connections between the workstation parts (display,
keyboard, mouse, printer) according to the manufacturer instructions.

✔

Parts and accessories storage

Other parts or accessories must be carefully stored according to their technical specifications.

✔

Malfunctioning

If the system is not working as described inside this manual, please immediately contact the

Technical Support.

✔

Maintenance agreement

The device should be periodically checked: please contact the manufacturer or distributor to
discuss for a maintenance contract

✔

System testing check list

The following check list specifies the suggested time spaces for the system controls. For further
information please contact your local distributor.

3-4

NewTom 5G

– User Manual

«
...
21
22
23
24
25
...
»

Содержание NewTom 5G















































































































Отзывы:

Нет отзывов