CEFLA NewTom 5G Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 110

CEFLA NewTom 5G Скачать руководство пользователя страница 18

2 About safety

WARNING:

Do not stare into the laser beams, do not view directly with
optical instruments, and avoid direct exposure to the beam.
The beams can cause permanent eye damage.

WARNING:

Keep your eyes at least 40 cm from the laser when the
beam is on.
If necessary, use appropriate protective glasses.

WARNING:

The use of controls, adjustments, or the performance of
procedures other than those specified herein may result in
hazardous radiation exposure.

2.9 Devices connected to the NewTom 5G console

Workstations, displays, printers, keyboards and other devices which may be connected to the NewTom 5G
console

MUST

comply with ISO and/or IEC and/or EN standards and/or local laws in force. CEFLA s.c. is

available for further information.

CEFLA s.c. is available for additional details about this matter.

NOTE:

The   manufacturer   is   not   accountable   for   faults   and/or
malfunctioning   of   parts   that   were   not   supplied   or
approved   by   the   manufacturer,   or   not   installed   by
technical staff qualified and certified by the manufacturer
itself.

Food and beverage may not be placed or eaten/drunk close to the device and the workstation.

2-10

NewTom 5G

– User Manual

«
...
16
17
18
19
20
...
»

Содержание NewTom 5G















































































































Отзывы:

Нет отзывов