A
Step 33: Attach Elbow Assemblies and TNR4 Slide
Hardware
2 x
#12 x 1” Pan Screw
2 x
#8 x 3” Wood Screw
1 x
#7 x 5/8” Pan Screw
Other Parts
1 x TNR4 Post Mount
1 x 1/4 x 14.5 mm Pan Head Bolt
1 x Square Lock Nut
A:
Place TNR Brace centered over pilot holes of (100) AL-RW Ground Brace. Attach with 2 (S4) #8 x 3” Wood
Screws.
(fig. 33.1 and 33.2)
B:
Place 1 TNR4 Post Mount Clamp on either side of the Clamp Ring so that the bent tops clip in behind the
Clamp Ring. (fig. 33.3)
C:
Insert the TNR4 Post Mount Base in between the 2 TNR4 Post Mount Clamps and bolt all pieces together
using one ¼ x 14.5mm Pan Head Bolt and Square Lock Nut. (fig. 33.3)
D:
Attach TNR4 Post Mount Base to (321) TNR Upright, pre-drill with a 1/8” drill bit then attach with 2 (S6) #12 x
1” Pan Screws. (fig. 33.3)
E:
Attach the Post Mount Clamp to the clamp ring using 1 (S37) #7 x 5/8” Pan Screw. (fig. 33.3)
Fig. 33.1
Fig. 33.2
Inside View
Fig. 33.3
S6
S4
S37
100
100
100
A
A
TNR4 Post
Mount Base
TNR4 Post
Mount Clamp
S37
S4
Square
Lock
Nut
S6
321
¼ x 14.5mm
Pan Head Bolt
78
Содержание F25720
Страница 107: ...NOTES 107 europecustomerservice kidkraft com ...
