CE+T Power Bravo 10 - 48/230, Руководство пользователя

Страница: 7 / 43

3. Warranty and Safety Conditions
*
WARNING:
The electronics in the power supply system are designed for an indoor, clean environment.
When installed in a dusty and/or corrosive environment, outdoor or indoor, it is important to:
•
Install an appropriate filter on the enclosure door, or on the room’s air conditioning system.
•
Keep the enclosure door closed during operation.
•
Replace the filters on a regular basis.
Important Safety Instructions and Save These Instructions.
3.1 Disclaimer
•
The manufacturer declines all responsibilities if equipment is not installed, used or operated according to the
instructions herein by skilled technicians according to local regulations.
•
Warranty does not apply if the product is not installed, used and handled according to the instructions in the
manuals.
3.2 Technical care
•
This electric equipment can only be repaired or maintained by a “qualified employee” with adequate training.
Even personnel who are in charge of simple repairs or maintenance are required to have knowledge or
experience related to electrical maintenance.
•
Please follow the procedures contained in this Manual, and note all the “DANGER”, “WARNING” AND “NOTICE”
marks contained in this Manual. Warning labels must not be removed.
•
Qualified employees are trained to recognize and avoid any dangers that might be present when working on or
near exposed electrical parts.
•
Qualified employees know how to lock out and tag out machines so the machines will not accidentally be turned
on and injure employees working on them.
•
Qualified employees also know safety related work practices, including those by OSHA and NFPA, as well as
knowing what personal protective equipment should be worn.
•
All operators are to be trained to perform the emergency shut-down procedure.
•
Never wear metallic objects such as rings, watches, or bracelets during installation, service and maintenance of
the product.
•
Insulated tools must be used at all times when working with live systems.
•
When handling the system/units pay attention to sharp edges.
* These instructions are valid for most CE+T Products/Systems. Some points might however not be valid for the product
described in this manual
Warranty and Safety Conditions
7 - Bravo 10 - 48/230 - User manual - v1.2