C
OMPONENT
M
AINTENANCE
M
ANUAL
S
OAP
D
ISPENSERS
S
EIFENSPENDER
B82X
S
ERIES
No.: 25-40-01
Issue: D
Date: May 02/2022
25-40-01
May 02/2022
DISASSEMBLY
1.
GENERAL
A.
The disassembly of the Soap Dispenser is necessary to replace a
part, to carry out repairs, or to overhaul the Soap Dispenser.
NOTE: The degree of disassembly carried out shall not be more than
necessary. For identification of damage or function failures
refer to the chapters CHECK and TESTING AND FAULT ISOLATION.
2.
PROCEDURE
A.
Disassembly of B822 version (Ref. IPL, Fig. 1A to 1D and
Fig. 2A)
(1)
Remove adapter (1-50) from container (1-60).
(2)
Separation of Piston Assy from Shank Assy
(a)
Unlock cover (2-60) and separate Piston Assy (1-10) from
Shank Assy (1-40).
NOTE:
For procedure refer to chapter SERVICING.
(3)
Disassembly of Piston Assy (Ref. IPL, Fig. 2A)
(a)
Remove guide key (80) from cylinder (90).
(b)
Separate piston (10), spring (30), washer (70), duck
valve (50), cover (60) from cylinder (90) with bonded
adjusting washer (40).
(c)
Remove O-ring (20) from piston (10).
NOTE:
Remove and discard placard only when damaged, loose
or if another language is required.
B.
Disassembly of B823 version (Ref. IPL, Fig. 1E to 1H and
Fig. 2A)
(1)
Remove adapter (1-50) from container (1-60).
(2)
Remove clamp (1-60) and tube (1-70).
(3)
Separation of Piston Assy from Shank Assy
(a)
Unlock cover (2-60) and separate piston assy (1-10) from
shank assy (1-40).
NOTE:
For procedure refer to chapter SERVICING.
(4)
Disassembly of Piston Assy (Ref. IPL, Fig. 2A)
(a)
Remove guide key (80) from cylinder (90).
(b)
Separate piston (10), spring (30), washer (70), duck
valve (50), cover (60) from cylinder (90) with bonded
adjusting washer (40).
PAGE 3001