Cattron-Theimeg i-Key, Руководство по эксплуатации и техническому обслуживанию

Страница: 40 / 90

Section 3, Page 10

01/2001, CATTRON - THEIMEG
TM
Operating Procedure – PS Controller
, continued.
4. Press any large pushbutton . The PS Controller is now fully operational and transmitting a
signal as indicated by the green TRANSMIT LED flashing. Operate the pushbuttons and
switches as required, remembering that each large pushbutton must be maintained in order for
the function to continue to operate. Any or all functions may be operated simultaneously if the
controlled machine permits such operation.
NOTES: (1) A system STOP may be initiated at any time during the control
function by pushing the red STOP switch downwards.
(2) When all control functions have been completed, we recommend
you initiate a system STOP (push red STOP switch down) before
setting the ON/OFF switch to the ‘OFF’ position. This will prevent the
Mainline contactor from remaining energized for up to 10 minutes via
control of OPR.
END OF SECTION