14
During the phase A the system has not reached the fi xed fl ow, therefore the liquid is
conveyed back to the Hydrocyclone; in the phase B, with the suitable fl ow, separation
is obtained and the processed liquid can be conveyed to the waste (8).
Technical features
HYDROCYCLONE ISO 18
Name : HYDROCYCLONE ISO 18
Classifi cation according to ISO 11143 : Type 4
Maximum fl ow according to ISO 11143 : 18 l/ min.
Degree of separation according to ISO 11143 with 18 l/ min. fl ow : > 98 %
Degree of separation according to ISO 11143 with 0,5 l/ min. fl ow: > 98 %
Amalgam container capacity : 250 ml
Room temperature : max. +40 °C, min. +5 °C
Control panel voltage drive : 12 V DC
Amalgam level sensor voltage drive : 14 V DC
Dimensions: H = 415 mm, L = 190 mm, W = 225 mm
Hydrocyclone ISO 18 is supplied with the “Separatore Centrifugo Compatto” of which
you will fi nd some details listed below.
“SEPARATORE CENTRIFUGO COMPATTO”
Name : “SEPARATORE CENTRIFUGO COMPATTO”
Electric power supply : 230 - 240 V 1 ~ 50 Hz 2,8 A , 230 - 400 V 3 ~ 50 Hz 2,2 -1,3 A
Maximum allowed negative pressure : 300 mbar
Connection
• Electrical shock risk : also 230 V
can be lethal.
• General danger sign.
• Biological danger, risk of infections from epidemic diseases.
• Compulsory direction of fl ow or of rotation.
This section is intended to illustrate the connections between the Hydrocyclone ISO 18
and the “Separatore Centrifugo Compatto”.
Hydraulic connection (draw. 3 page 43)
All the connections must be properly fi xed and secured using a mechanical securing
system like a pipe clamp.
For the connections use only original hoses. Replace them every two years at the
latest. Do not use hoses with a diameter different from the one of the hoses originally
supplied with the Hydrocyclone.
• Hose inlet connection (12) to the Hydrocyclone
Hose diameter d = 17,5 mm
• Re-circulation hose connection (13)
Hose diameter d = 17,5 mm
