17
ENGLISH
Mounting
(draw. 5 page 45)
• Electrical shock risk : also 230 V
can be lethal.
• General danger sign.
• Biological danger, risk of infections from epidemic diseases.
• Compulsory direction of fl ow or of rotation.
Distances
The maximum distance does not depend on the Hydrocyclone but on the suction pump,
we therefore recommend that you refer to the instructions of the suction pump supplied
by the manufacturer.
Positioning
The Hydrocyclone can be installed in the following layouts:
1)
installation on the same level of the dental units
2)
installation on the lower level
The Hydrocyclone must be easily accessible from all sides. Leave a free space on the
top and on the front of the unit to facilitate maintenance procedures.
Liquids drain due to fall, therefore we recommend to provide a fall towards the sewage
to facilitate the draining. It is possible to place a small trap, provided that it does not
obstruct the draining.
Notices
After installation, the installer should train the surgery staff with practical demonstra-
tions for amalgam container replacement and fi lter cleaning on new and therefore
not contaminated machines.
Installation, connection, mounting, maintenance and other work on the amalgam
separator must be entrusted to technicians who have been specially trained in
the dental fi eld and who are authorized by the manufacturer. The aspirated liquid
is contaminating and infected, therefore we recommend to take all the necessary
precautions to prevent personal and environmental contamination. Bad running
can also lead to contamination.
General warnings and biological risk
• Before starting any servicing operation on appliances which have been used, carry
out a series of rinses with a suitable disinfectant.
• Disconnect the centrifugal separator from the mains supply and padlock the
isolating switch, if present.
• Before starting any maintenance work, wear gloves, goggles, mask and disposable
overalls.
The centrifugal separator pressurises aspirated liquid and forces it inside the
Hydrocyclone.
In case of a failure of a pipe or of a component under pressure biological risk is
more serious.
