ENGLISH
–
October 2020 - IND B
Page
54
of
142
CATANA SAS - Zone Technique du Port - 66140 CANET EN ROUSSILLON (FRANCE)
e - mail: [email protected] - Tel 33 (0)4 68 80 13 13 - Fax 33 (0)4 68 80 13 19
WARNING
Scrupulously respect the usage instructions of the products you are using..
WARNING
In the event of an impact with a sharp object, the hull is liable to have been breached. Should this be
the case, repairs must be effected as soon as possible.
19.3. Cleaning the deck
•
Use products specifically designed for washing or cleaning decks.
•
Rinse thoroughly.
•
Do not use any abrasive detergent.
•
Any glazed areas must be cleaned with products and materials suitable for PMMA.
•
To maintain the shine of painted or varnished areas, it is important to rinse the boat frequently
with fresh water.
•
Use non-aggressive products which are specific for the particular maintenance.
19.4. Marks on the hull or deck
19.4.1. Scratches
•
Sand with 1000 grade abrasive paper. You can add a little washing-up liquid to prevent the paper
clogging.
•
Rinse thoroughly.
•
Finish off with a polishing product for paint.
19.4.2. Chips in the gelcoat in smooth areas
•
Clean and thoroughly dry the affected area.
•
Prepare a small amount of filler in the colour of the deck or the hull (see your dealer).
•
Apply with a spatula.
•
Cover the repair with polyamide film or sticky paper.
•
Remove the film when the repair has dried.
•
Sand with water using 400-grade wet and dry paper, then 600-grade, then 1000. Add a little
washing-up liquid to prevent the paper from clogging.
•
Rinse thoroughly.
•
Finish off by polishing with a product designed for paint.
