ENGLISH
–
October 2020 - IND B
Page
14
of
142
CATANA SAS - Zone Technique du Port - 66140 CANET EN ROUSSILLON (FRANCE)
e - mail: [email protected] - Tel 33 (0)4 68 80 13 13 - Fax 33 (0)4 68 80 13 19
3.2. Installing new equipment
Since 1st January 1996, electrical equipment has been subject to the European Directive on
“electromagnetic compatibility” (Ref 2014/30/EU). If any new equipment is to be installed, it must
therefore conform to these standards and must be CE marked. The equipment must also be accompanied
by a certificate of conformity and a user manual.
Only use electrical equipment which is double insulated or has an earth connection in the case of a 220V
installation. When fitting such equipment, ensure you follow the installation instructions with respect to
cable sizing and fuse protection.
To avoid any maintenance problems, make appropriate changes to the wiring diagram to show the
modifications.
Replaceable fuses:
beneath the chart table.
Fuse box and lighting configuration control box:
Access beneath the removable panel under the beds in forward and aft port and starboard cabins.
The bed-base under the mattress will need to be removed.
Fuse box (Feed for lighting, fans,
reading lights, USB sockets)
Lighting configuration control box