Catalyst 180-R, Инструкция по сборке

Страница: 14 / 74

STEP 2
Parts Required:
4 X Outrunner Brushless Motor (Sold Separately)
16 X Socket Head Screw (M3 x 6mm long x
blue 7075 aluminum )
16 X Washer (M3 x aluminum)
Assembly Process:
Join your motors to the Main Frame Plate as shown below. Use 4 screws and 4 washers per motor. Included in your kit
are M3 screws for this purpose. But, the main frame plate will accept M2 screws for use on smaller 1806 or similar sized
motors. We do not include this size motor mount screw in your kit. You will need to source these on your own. Orient the
motor such that it's wire lead runs straight down the arm.