Catalyst 180-R, Инструкция по сборке

Страница: 3 / 74

QUANTITY PART DESCRIPTION
1 Top Fuselage Plate (1.5mm CF)
1 Main Frame Plate (3mm CF)
1 FPV Camera Cage Top Plate (3mm CF)
2 FPV Camera Cage, Side Plate (1.5mm CF)
1 PDB Bay Cover Plate (1.5mm CF)
1 PDB Bay Guard (Black 3D Printed ABS Plastic)
1 Antenna Mount (Black 3D Printed TPU)
2 Antenna Tubes (Blue Plastic 1/8” Diameter)
1 FPV Camera Adjustment Mount (Black 3D Printed ABS Plastic)
2 Standoff (Black aluminum M3 thread x 32mm long)
4 Standoff (Black aluminum M3 thread x 18mm long)
4 Standoff (Black aluminum M3 thread x 12.5mm long)
1 XT60 Passthrough Grommet (Black Rubber)
1 Velcro Lipo Strap – Catalyst Machineworks
1 FPV PRO Power Distribution Board – Catalyst Machineworks *If purchased your frame with PDB*
4 Flight Controller Hex Standoff (Black plastic M3 thread x 10mm long)
4 Flight Controller Nut (Black plastic M3 thread)
4 Flight Controller/FC Mount Screw (Black plastic M3 thread x 10mm long)
4 PDB Spacer (Black plastic M3 hole)
4 PDB Guard Inserts (Silver Aluminum M3 Hole x 4.5mm OD x 6mm long)
2 Antenna Mount Inserts (Silver Aluminum M3 Hole x 4.5mm OD x 5mm long)
2 FPV Camera Mount Adjustment Screw (Phillips head #4 x 3/8” long x stainless steel)
2 FPV Camera Mount Screws (Phillips head #2 x 3/8” long x stainless steel)
20 Washer (M3 x aluminum)
4 Socket Head Screw (M3 x 10mm long x blue 7075 aluminum )