Operator's Manual
HPS10 Pellet Stove
Check for parts online at
www.castlestoves.com
or call 800-345-6007 M-F 8-5 CST
10
specIfIcatIons
model number
hps10
BTU/hour input (1)
3.7 lbs/hr
Heating Capacity (2)
1,500 sq. ft.
Electrical Rating (3)
115 Volts, 60 Hz
Power Consumption
520 Watts ignition
150 Watts operating
Fuel Storage Capacity
1 bag
Flue Size (4)
3 in.
Width
18.25 in.
Height
34 in.
Depth
23.75 in.
Weight
186 lbs.
(1) Heat output will vary, depending on the brand, type
and quality of fuel and the moisture content. Consult
your dealer for best results.
(2) Based on post 1982 home construction, requiring 35
BTU/Hr. per Sq. Ft.
(3) Install per NFPA 70 and follow all state and local
codes, contact licensed electrical contractor for
assistance.
(4) Install per NFPA 211 and follow all state and local
codes, contact licensed installers for assistance.
Listing label:
Tested to the following standards: UL1482, ASTM E1509,
ULC/ORD-C1482-M1990, and UCL S627-2000
glass specIfIcatIons
This stove is equipped with 5 mm ceramic glass. Replace
glass only with Castle Pellet Stoves ceramic glass. Call
your Servicing Dealer or Castle Stoves at 1-800-345-6007
for replacement parts.
unpackIng
Your Castle HPS10 will come fully assembled. Remove
all packing material and tape from the inside of the
firebox. Remove any tape on the outside of the glass.
Open the hopper, remove all packing material and
power cord.
NOTE: MakE surE ThE hOppEr is frEE Of all
fOrEiGN MaTTEr bEfOrE filliNG wiTh fuEl.
fOrEiGN MaTErial will causE auGEr jaMs
aNd will vOid sTOvE warraNTy.
CAUTION
thIs InstallatIon must conform wIth
local codes. In the absence of local
codes you must comply wIth astm
e1509, (um) 84-hud, ulc/ord-c-1482 and
and ucl s627-2000.
castle pellet stoves, manufacturer of
thIs applIance, reserves the rIght to
alter Its products and/or theIr specI-
fIcatIons wIthout notIce.
