Casselin Sigma 2200i, Руководство пользователя

Страница: 8 / 48

8
Unpacking and Placement
We have taken all precautions, and made every effort to make the Sigma 2200i
simple and straightforward to install and use. Still, we recommend that you
take a few minutes to review this manual. Even if you are having the integrated
amplifier professionally installed, you will want to know how to efficiently
operate it to its potential.
The Sigma 2200i menu system includes features that provide you with a great
deal of fine-tuning. Still, we have no way to evaluate outside variables such as the
acoustical characteristics of your listening space and the associated equipment of
your audio system. Therefore, it is up to you to make the final audio adjustments
for the optimum performance of your system.
For this reason, we strongly encourage you to have your integrated
amplifier installed and calibrated by your dealer. The experience,
training, and specialized equipment they have can make a profound
difference in the final performance of your system.
unpacking your
Sigma 2200i
Carefully unpack the Sigma 2200i according to the supplied instruction sheet.
Do not forget to remove all accessories from the carton.
Important!
Keep all packing materials. Transporting the Sigma 2200i
without using the packaging specifically designed for it may
result in damage that is not covered under the warranty.
Sigma 2200i placement
considerations
Before installing your Sigma 2200i, be sure to read the following placement
suggestions.
• Do not place the Sigma 2200i directly on the top surface of a
conventional power amplifier or any other heat source. Also keep the
unit out of direct sunlight.
• Place the Sigma 2200i so that the IR window on the front panel is
clearly visible and not blocked.
• Position the Sigma 2200i in a central and convenient location for
both visibility and use. The integrated amplifier is the hub for all other
component connections and generally your primary interaction point.
In addition, by placing the unit close to the other system components,
you minimize the cable lengths and hence reduce the amount of noise
that is introduced into the system through the cabling.
• Leave adequate clearance behind the Sigma 2200i for the AC cord and
connecting cables. We suggest six inches (15 cm) of free space to allow
cables sufficient room to bend without crimping or undue strain.
• Do not obstruct the area around the unit so that excess heat can
dissipate through normal air circulation.