Casselin Sigma 2200i, Руководство пользователя

Страница: 36 / 48

36
Balance
To adjust the L/R Balance, when on the Balance page, use the volume knob or
the volume up/down keys of the remote control. Balance is adjusted in 0.5 dB
increments by alternately boosting and cutting 0.5 dB from each channel. In this
way, the overall level stays roughly the same as the balance shifts. The Balance
control works by making adjustments with the master volume control, so no
additional circuitry enters the signal path when balance adjustments are made.
The Balance control offers a range of +/- 10.0 dB and moving the control to
either extreme turns off the opposite channel (used mostly for troubleshooting).
NOTE: Your L & R speakers may not produce the exact same
output for a given input, or their location in the room or relative
to your listening position may contribute to a perceived imbalance
of up to a few dB. To compensate for this, play a simple vocal
recording and put the Sigma 2200i in Mono (press Menu, then
Mono). Open the Balance control page and using the remote,
adjust the balance until the sound image is perfectly centered. If
you close your eyes and do this a few times, you will find that one
number, (e.g. Right 1.5 dB) may appear consistently. If so, you
know that is the adjustment your system requires. Leave the setting
there, return to normal stereo operation and then forget all about
the balance control.
Configurations
You may create up to six different output configurations to accommodate
preferences like with or without subwoofer, or with subwoofer having different
crossover settings. While these configurations may be associated with specific
sources, they may also be called from the Main Menu page or the Classe
app. Pressing the Configurations button in the Main Menu or choosing
Configuration on the Classe app opens the Configurations page. Choose the
configuration you wish to employ.
To customize configurations, see the Configuration Setup description in the
System Setup section.
Mono
Pressing the Mono button combines L & R channels, resulting in monaural
output. When in Mono, the Mono button is shaded. Press again to deselect and
return to normal stereo operation. When in Mono, the word Mono appears on
the Home page.
Status
The Status screen provides several items of information on the currently selected
source and configuration as well as access to information on the firmware used in
the Sigma 2200i and its serial number.