Casselin Sigma 2200i Скачать руководство пользователя страница 29

29

Timeout

If you prefer listening to music in a dimly-lit or darkened room, you may 

find even the 

low 

brightness setting of the display somewhat distracting. You 

can essentially turn off the touchscreen by reducing the 

timeout

 value of the 

backlighting so as to turn it off entirely after a period of inactivity that you 

may select. In this context, activity refers to any use of the user interface. This 

includes hard buttons, the touchscreen, the Classe app and the remote control.

For example, if you reduce the timeout to its minimum setting, the backlighting 

illuminates the display as soon as you interact with any of the Sigma 2200i 

controls, and remains lit for only three seconds – just long enough for you to 

check a setting. If you continue to use any of the controls (at least once every 

three seconds), the display remains lit. After three seconds of inactivity on your 

part, the backlight extinguishes itself, essentially turning off the touchscreen.

If you prefer the display of the Sigma 2200i to remain on whenever not in 

Standby

 mode, select the 

Never

 timeout option. The lamp in the touchscreen 

display is designed for harsh automotive environments and will give you many 

years of reliable operation. 

NOTE: setting the brightness to a lower setting does not increase 

the life of the lamp.

On Screen Display

Pressing MENU or using sources associated with a video output will generate 

On Screen Display (OSD) images overlaid on the video output to indicate the 

selected source and volume level. These OSD images are enabled by default but 

may be disabled if you find them unnecessary or distracting.

Volume Setup

Touching the 

Volume Setup 

button in the System Setup menu opens the 

Volume Setup page, as shown below. The volume knob is used to make all 

volume setup adjustments.

Volume Setup allows you to:

•  set a maximum volume level;

•  choose an initial volume level for the system whenever the Sigma 2200i is 

brought out of Standby;

•  customize the behavior of the mute control.

Содержание Sigma 2200i

















































Отзывы: