![Casselin Sigma 2200i Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/casselin/sigma-2200i/sigma-2200i_owners-manual_2572561014.webp)
14
Rear Panel
The rear panel of the Sigma 2200i is shown above. The numbers in the drawing
refer to the descriptions in this section.
serial number
You’ll find your Sigma 2200i serial number located adjacent to the AC Mains
Input connector on the rear panel, as shown in the graphic above. Please record
this number for future reference.
And since you have found the serial number, please use it to register your
purchase, if you haven’t done so yet. We may use the information to advise you
of any updates or other items of interest. Registration is simple, so please register
online at www.classeaudio.com or fill out the registration card and drop it in the
mail.
1
Ethernet Connector
The Ethernet connection is used to enable streaming of audio using Apple’s
AirPlay or DLNA. This connection also supports IP control for using the
Classé App with iOS or Android devices and/or a home automation system
to control the Sigma 2200i via your home Network.
2
Digital Audio Input - USB
The Sigma 2200i supports digital audio sources up to 24-bit/192 kHz via
USB. The rear panel USB Device connector mates with a USB Host such
as a PC or Mac.
3
Digital Audio Inputs - Optical
The Sigma 2200i supports two digital audio inputs, with optical TOSlink
TM
connectors labeled OPT1 and OPT2. These inputs accept PCM data
streams up to 24-bits long and up to 96 kHz sampling frequency. We
recommend using cables that are optimized for digital audio signal transfer.
Your Classé dealer can help you with proper cable selections.
NOTE: The bandwidth limits of TOSlink™ components are very
much strained at a 192 kHz sampling frequency. For that reason
we limit signals using the TOSlink™ connections to a maximum
rate of 96 kHz.
ANALOG AUDIO IN
HDMI IN
HDMI OUT
R1
L1
L2
L3
R2
R3
CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, GROUNDING
OF THE CENTER PIN OF THIS PLUG MUST BE MAINTAINED
AVIS! POUR RÉDUIRE LE RISQUE DE CHOC ÉLECTRIQUE
LA FICHE CENTRALE DE LA PRISE DOIT ÊTRE
BRANCHÉE POUR MAINTENIR LA MISE À LA TERRE
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
COAX 1
COAX 2
OPT1
OPT2
USB
ETHERNET
DIGITAL I/O & CONTROL
GND
SUB OUT
IN
OUT
CLASS 2 WIRING
CLASS 2 WIRING
RIGHT SPEAKER
LEFT SPEAKER
100-120~ T6.3AH 250V
220-240~ T3.15AH 250V
1
13 14 15
2
3
4 5
7
6
8
9
10
11
12
12
Содержание Sigma 2200i
Страница 1: ...Owner s Manual Sigma 2200i Stereo Integrated Amplifier...
Страница 47: ...47...