Casselin Sigma 2200i, Руководство пользователя

Страница: 34 / 48

34
Remote Fkeys
The remote control supplied with the Sigma 2200i has three function keys
(Fkeys) , each of which can give you instant access to specific system functions.
For example, if you want direct access to particular sources or configurations,
you may want to consider programming some of the Fkeys to directly access
them. By assigning them as Fkey functions, you do not need to use the arrow
keys to scroll through the active sources or configurations looking for them.
The remote control F1 to F3 buttons correspond to the Function Keys
displayed on the touchscreen. Select the Function Key that you would like to
assign, then scroll through the list and choose the specific function you want
that Fkey to perform. Although the remote control is limited to three Fkeys, the
Sigma 2200i can respond to as many as eight different Fkey commands. Certain
other Classé remote controls and aftermarket learning remotes are capable of
utilizing these additional commands.
Important note on Fkey use
All Classé Delta and CT series remote controls provide at least four Fkeys.
Commands F1-F4 on every Classé remote send the same IR signals as F1-F4
on every other Classé remote, so you do not need to worry about which remote
you’ve picked up. Thus F1 on the Sigma 2200i’s remote control sends the same
infrared signal as
F1
on the CD player’s remote control and so on.
While this is intended to minimize confusion amongst different remotes (since
this aspect of them will all perform identically), you should take care when
assigning different functions on different components to the same Fkey . Doing
so can result in two components doing two different things at once, in response
to a single press of a button on the remote control. This can sometimes be
useful. As an example, F1 could set the integrated amp to the CD Player input,
and also set the CD player to Play , both from the press of a single Fkey.