Casotti EURO-A, Руководство по эксплуатации и обслуживанию

Страница: 22 / 36

22
Changing the oscillation angle
Normally, the Casotti sprayer is supplied already appropriately adjusted,
according to the work to be performed.
To change the oscillation angle, operate the adjustment located under
rubber cap (code 4) located in the lower cover.
Remove the cap and set the switch to the lowest speed and stop the
movement in the most comfortable position to loosen the bolt.
In order to change the oscillation angle, loosen the bolt and use a
screwdriver to move the adjustment lever, tighten the bolt and then check
whether the angle is as desired.
The oscillation angle of the two central stainless steel pipes varies between
75° and 205°.
The oscillation angle of the side stainless steel pipe is always half of the two
central stainless steel pipes, varying between 37.5° and 102.5°.
Periodical checks and calibration
In compliance with the PAN (Piano di Azione Nazionale, National Action
Plan for sustainable use of pesticides, art. 6 of legislative decree no. 150 of
14th of August 2012), Casotti sprayers must be periodically checked and
calibrated.
Contact Casotti Irroratori to receive all information and instructions in this
regard.
POLYETHYLENE CAP