Graco SaniSpray HP 20 Скачать руководство пользователя страница 1

Страница: 1 / 32

3A7649A

For portable spraying of water-based disinfectants approved for spray application only.

Not for applying architectural paints and coatings. Not approved for use in explosive

atmospheres or hazardous (classified) locations. For professional use only.

Important Safety Instructions

Read all warnings and instructions in this manual, on the unit, and in the battery and

charger manual before using the equipment. Be familiar with the controls and the

proper usage of the equipment. Save these instructions.

Important Medical Information

Read the medical alert card provided with the sprayer. It contains injection injury

treatment information for a doctor. Keep it with you when operating the equipment.

Operation, Repair, Parts

SaniSpray HP

™

Cordless Airless Handheld

Use only genuine Graco replacement parts.

The use of non-Graco replacement parts may void warranty

WARNING

CHEMICAL HAZARD

To prevent serious injury:

•

Follow all directions and
requirements on disinfectant

label. It is a violation of Federal

law to use an EPA-approved

disinfectant in a manner

inconsistent with its labeling.

•

Flush after each use. Never
store disinfectant in

equipment.

•

Use only with appropriate
personal protective

equipment.

844-241-9499

Содержание SaniSpray HP 20

































Результаты поиска

Содержание SaniSpray HP 20

Отзывы:

Похожие инструкции для SaniSpray HP 20

Бренды по названию

Популярные бренды

Graco SaniSpray HP 20, Операция - Ремонт - Запчасти

Результаты поиска

Содержание SaniSpray HP 20

Отзывы:

Похожие инструкции для SaniSpray HP 20

Бренды по названию

Популярные бренды