Casotti EURO-A, Руководство по эксплуатации и обслуживанию

Страница: 15 / 36

15
orientated to the right or to the left.
Hold the pivot with pliers, tighten the nut and check that the rotation of the
elbow describes an angle of about 180°.
2- Bring the long elbow to the centre of the angle of oscillation.
Screw the small elbow to the same position as the long one.
When the motor is activated, the two elbows will cross.
The correct movement of the two elbows is described in the following figure.
Hydraulic connection and maintenance
Pipes coming from the pump must be connected directly to the supplied
revolving square unions (code M300).
Periodically grease the inside of the revolving square union (preferably with
Teflon grease). In order to disassemble the square union, remove the Seger
ring on the top.
C
MOVEMENT OF CURVE 180°
ROUND HOLE NOZZLE
MOVEMENT OF CURVE 90°
FAN NOZZLE
EUROGET
39AE
40A
180° (40A)
90° (39AE)
M300
39AE
40A