Casotti EURO-A, Руководство по эксплуатации и обслуживанию

Страница: 13 / 36

13
TECHNICAL INFORMATION - OPERATION
Description of the machine
The Casotti sprayer is designed and manufactured in compliance with
Directive 2006/42/EC.
EUROGET is a 12V electrical device with horizontal oscillating jets suitable
for weeding and treatments.
Particularly indicated on uneven terrain, on a slope, with obstacles, and
where it is impossible or uncomfortable to weed using a classic bar.
The sprayer is made up of a machine body and some parts to be assembled:
- 1 EURO type machine body
- 1 orthogonal joint code 30
- 1 support code 29
- 1 long elbow code 40A
- 1 small elbow 39AE
- 1 plug code 31
- 2 revolving fittings code M300
The standard long elbow features a nozzle with a round hole Ø 2.5 mm and
an anti-drip device, the small elbow features a fan shaped nozzle Ø 1.5 mm
and an anti-drip device.
The machine body is of the EURO type: there are two stainless steel through
tubes, a central one that oscillates at 180°, and a side one that oscillates at
90°.
The nozzles are made of steel or brass, with tungsten carbide or alumina
(ceramic) inserts.
Application to an existing system comprising tank and
pump
EUROGET can be applied to any transported or pulled system,
fitted with tank and pump.
We recommend a medium or high pressure pump (minimum 20 bar,
maximum 50 bar) with a minimum flow rate of 50 l/minute.
The sprayer cannot operate with low pressure pumps.