Casotti EURO-A, Руководство по эксплуатации и обслуживанию

Страница: 14 / 36

14
First apply a Ø 48 metal pipe (not supplied) to the tank frame.
Secure the orthogonal joint (code 30) to the pipe, then insert the support
(code 29) in the joint and tighten it.
Apply EUROGET to the support by means of the bolt and nut supplied with
the support. Firmly tighten the bolts to prevent the accidental fall of the
machine.
Position EUROGET so that the jets are perfectly horizontal at 50/60 cm from
the ground or the vegetation to be treated.
Electrical connection
A cable sufficient to arrive to a point on the tractor that has a voltage of 12
Volt must be connected to the supplied plug (code 31).
(For a 24 Volt connection, contact Casotti for specific instructions).
A 2 x 1 two-pole cable compliant with current safety regulations must be
used.
Warning:
The supplied plug has 2 numbers at the two poles, visible on the front.
When connecting the cable to the plug, the positive pole must be inserted
into no. 58.
If cables are inverted, the gear motor may be irreparably damaged.
Insert the power plug (code 31) to the socket (code 27) located on the side of
the central body. Actuate the switch (code 28) located on the sprayer body
to ensure that current is supplied.
Always keep at a safe distance from moving parts.
Assembling revolving square unions and curves to the
machine body
From the plate side (high) screw the two revolving fittings to the two stainless
steel tubes.
When screwing the tube to the sprayer, hold the pivot with pliers to avoid the
forced rotation of the internal mechanism.
To assemble the elbows, proceed in this order:
1- Place the long elbow on the central stainless steel tube.
Before tightening the nut, use the switch to stop the elbow in its maximum
rotation from one side.
The elbow must be perpendicular to the direction of operation, that is