Projection Operations
52
Manual Keystone Correction
Manual keystone correction can be used to correct for both vertical and horizontal keystoning.
To use manual keystone correction
1.
Press the [KEYSTONE] key.
z
This causes the keystone correction screen to appear on the projected image.
2.
Use the [
S
] and [
T
] keys to select either “Vertical Keystone Correction”
or “Horizontal Keystone Correction”.
3.
Use the [
W
] and [
X
] keys to correct for keystoning.
z
Each press of [
W
] or [
X
] shifts the indicator on the currently selected bar left or right.
z
Keystone correction is possible within the range that the indicator is able to move within
the selected bar. Depending on conditions, the indicator may not move all the way to
either end of the bar.
z
Repeat steps 2 and 3 to perform keystone correction for the other direction, if you
want.
4.
After the settings are the way you want, press the [ESC] key or the
[KEYSTONE] key.
z
This causes the keystone correction screen to disappear.
