Getting Ready
30
Note that the condition of the environment where you use the projector greatly affects its
performance. Make sure that the following are the conditions of projector setup whenever you
use it.
z
Use a conveniently located power outlet that you can reach easily when you need to
unplug the projector.
z
Do not place any objects within the area indicated by the dashed line in the illustration
below. Be especially careful that you never block intake and exhaust vents.
z
Do not locate any objects near the projector while it is in use. Keep all items at least
30 cm (11.8 inches) away from the exhaust vents.
z
The vents become quite hot while the projector is in use. Never touch the vents with your
hands. Also, the areas near the exhaust vents also become quite hot. Never locate
objects made of plastic or other heat-sensitive materials near or under the projector. Doing
so creates the risk of deformation and discoloration of the object.
z
Avoid placing the projector on a surface that is unstable or prone to vibration. Never
place the projector on top of a carpet, blanket, towel, or other soft material.
z
Do not locate the projector where it will be exposed to direct sunlight.
z
Avoid locations where there are large amounts of dust and moisture.
z
Keep the projector away from speakers, TVs, radios, and other devices that generate
magnetism, as well as from heaters.
Setup Precautions
Allow sufficient
clearance and do not
block vents.
30 cm
(11.8 inches)
Allow sufficient
clearance and
do not block
intake vents.
Exhaust vents
Intake vents
