Casio IT-800 Series Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 325

Casio IT-800 Series Скачать руководство пользователя страница 83

83

Automatic Linking of Combined Symbols

The CMOS Imager supports automatic linkage of multiple symbologies.
When scanning symbols with the following combined symbols (see Table 2.61), the scanned data
is stored in the internal buffer and all of the data from combined symbols or all scanned symbols
is combined and output.

Combined symbols can only be scanned when the decoding mode is set to “Ordinary Read” mode.
Note that other modes including “Multi-step Read” and “Package Read” may cause incorrect
result of scanning combined symbols.

Table 2.62

Symbology Applicable

Symbols

Combination

Method

Code93

Code93 bar codes with a
space at the forefront

1.

When scanning symbols of Code93 symbology whose
forefront begins with a space, the scanned data is stored in the
internal buffer without being output.

2.

Furthermore, when continuously scanning symbols starting
with a space, the data is combined in the internal buffer in the
order that it is scanned and is not output.

3.

Finally, when scanning symbols other than those whose
forefront begins with a space, it is combined with the
internally stored data and output.

Code49

Code49 bar codes with
mode 1 (M=1) at the
forefront

Combination method is the same as for Code93 symbology.
Different to Code93 is that the combined symbols start with M=1
at the forefront.

QR Code

QR Code with
combination identifier.

Indicators displaying the number of symbol divisions and the
sequential number of the symbol are stored in the combined QR
Code. The decoder is therefore able to combine and output all data
in the order of the indicators upon scanning all of the symbols.

Binary Data Scanning

The CMOS Imager is able to output data scanned from symbols not only in standard character
strings but also in binary data. It is therefore possible to scan binary data of encoded data, images
and audio as well as character strings delimited by NULL characters.

The function of the Imager Library relevant to the “Binary Data Scanning” is as follows.

IMGWaitForDecodeRaw

:

Carries out decoding symbol including its binary data.

«
...
81
82
83
84
85
...
»

Содержание IT-800 Series






































































































































































































































































































































Отзывы:

Нет отзывов