Casio IT-800 Series Скачать руководство пользователя страница 140

Страница: 140 / 325

140

RMS Sentences

This outputs data on the Recommended Minimum.
Example of output:
$GPRMC,095636.00,A,3540.05781,N,13921.63500,E,0.851,193.03,011107,,,A*62

Table 2.106

Item Description

Validity

$GPRMC

Yes

095636.00

UTC time is displayed in the hhmmss.ss format.

Yes

A Indicates

status:

A = data is valid.
V = data is invalid during measurement.

Yes

3540.05781 Displays

longitude.

The

value

at the left shows a longitude of 35

degrees and 40.05781 minutes.

Yes

N and S indicate north and south respectively.

Yes

13921.63500 Displays

longitude.

The

value

at the left shows a longitude of

139 degrees and 21.63500 minutes.

Yes

E and W indicate east and west respectively.

Yes

0.851

Indicates ground speed (knots).

Yes

193.03 Indicates

traveling

direction (degrees).

Yes

Shows the date (UTC) as ddmmyyyy.

Yes

Geomagnetic variation (degrees).

011107

Indicates the direction of geomagnetic variations as a single
letter, i.e. N, S, E or W.

Indicates positioning mode:
A = independent positioning
D = DGPS
N = invalid

Yes

*62 Checksum

Yes

Note:
“Yes” indicates the presence of the valid output.
“No” indicates the absence of the valid output.

Содержание IT-800 Series





































































































































































































































































































































Результаты поиска

Содержание IT-800 Series

Отзывы:

Casio IT-800 Series, Руководство пользователя программного обеспечения, Страница: 140 / 325

Результаты поиска

Содержание IT-800 Series

Отзывы: