manualshive.com logo in svg

Casio IT-800 Series, Руководство пользователя программного обеспечения, Страница: 316 / 325

Поделиться
Скачать
Casio IT-800 Series Скачать руководство пользователя страница 316

 

316

7  

Version  

Displays the version of the displayed log. 

8   

Message   

Displays messages for the displayed log. 

9   

User identifier

Displays the user identifier for the displayed log, if one has been 

set. 

10   User-defined 

Data  

If there is any user-defined data for the displayed log, it is displayed 
with commas as separators. 

11    Previous 

Displays the previous log on the List screen. 

12    Next 

Displays the next log on the List screen. 

13   Close  

Closes this screen and displays the List screen. 

 

 

Log Files 

There are two types of log files:   

•

 Output 

files 

The output file for the current log 
The storage folder is \FlashDisk\Molog (initial setting).   

If the specified capacity (initial setting is 40KB) is exceeded, the next setting is the backup 
file.  

 

•

 Backup 

file 

This is the file to move data to if the specified capacity of the output file is exceeded.   
The storage folder is \FlashDisk\Molog\Backup (initial setting).   

If the total of the file sizes in the storage folder exceeds the specified capacity (initial 
setting is 120KB), log files are deleted, starting with the oldest.   

 
Log Files have the following file names.   

Item  

Contents  

Name  

MoLog<YYYY><MM><DD>_<NNN>. csv* 

※

 

<YYYY><MM><DD> is the date the file was generated.

 

   

<NNN> is a serial number (three digits, decimal) used in the event that multiple logs 
exist on the same day. It is a numerical string starting from "001". The number of files on 

the same date is limited to 999.

 

 

Содержание IT-800 Series






































































































































































































































































































































Отзывы:

Нет отзывов