41
5.3 Connection via Windows Mobile Device Center
To establish connection via USB interface with PC runs in Windows Vista, use Windows Mobile
Device Center (“WMDC”). The DT-X11 with the factory-setting (default) does not support the
WMDC. Follow the procedure below to change the setting on the DT-X11.
Note that the CAB file,
USBClientDTX11.110.CAB
, must be installed in the DT-X11 prior to
establishing connection with the DT-X11 via Windows Mobile Device Center. For installation
method, refer to Chapter 6.1 “Installing CAB Files”.
Procedure
1.
Close all applications running on the DT-X11.
2.
Navigate to
Settings
→
Control Panel
→
USB Connection
.
3.
Click
Connect Utility
tab (see red circle).
Figure 5.26
4.
Choose
Windows Mobile Device Center
radio button and then click
OK
button.
Figure 5.27
5.
A dialogue asking your final confirmation appears. Click
YES
button.
Figure 5.28
Содержание DT-X11M10E
Страница 16: ...16 Figure 2 2 Figure 2 3...
Страница 35: ...35 11 Now installing the driver is completed Figure 5 17...
