43
5.4 Connection via WLAN
The fastest and easiest way to connect the DT-X11 to your PC for development purpose is WLAN
compliant with the IEEE802.11b standard. In this configuration, models with WLAN module
integrated (applicable to DT-X11M10RC, M30RC, M10RC-CN, and M30RC-CN) are operable.
Follow the steps below to establish connection between the DT-X11 and PC via WLAN.
Establish Partnership
Establish partnership first between the DT-X11 and PC via Direct IrDA or Direct USB, or via
Bridge Satellite Cradle.
Set up WLAN Connection on the DT-X11
1.
Initiate
NetSearch
tool by navigating to
Programs
→
Communication
→
NetSearch
.
Figure 5.29 displays a list of WLAN stations.
Figure 5.29
2.
Navigate to
Display
→
New Connection
menu and set up the parameters shown in
Basic
(see Figure 5.30),
IP Setting
(see Figure 5.31), and
WLAN Setting
(see Figure 5.32) tabs.
3.
Enter the SSID (see Figure 5.30) and other necessary security parameters for the network. Tap
OK
button and then close the configuration window.
4.
A prompt that informs you that a reset is necessary to confirm these changes. Tap
OK
button.
Figure 5.30
Figure 5.31
Figure 5.32
Содержание DT-X11M10E
Страница 16: ...16 Figure 2 2 Figure 2 3...
Страница 35: ...35 11 Now installing the driver is completed Figure 5 17...
