66
7.4 Debugging Applications
This chapter describes how to debug your application using the
Device Emulator
. Before starting
to “Build”, establish a connection between the DT-X11 and your PC via ActiveSync by referring to
Chapter 7.3 “Using the Device Emulator”.
For the basic order of developing an application, refer to Chapters 8 “eMbedded Visual C++” and 9
“Visual Studio”.
7.4.1 Setting Build Configuration
When using Visual Studio 2008 or Visual Studio 2005
•
Choose
Debug
in the Solution Configurations pull-down menu in Visual Studio 2008 or Visual
Studio 2005 and
DT-X11 Emulator
in the target device pull-down menu. See Figure 7.17.
Figure 7.17
When using eMbedded Visual C++ 4.0
•
Choose
DT-X11
in the Active WCE Configuration in the pull-down menu in eMbedded Visual
C++ 4.0,
Win32 (WCE ARMV4I) Debug
in the Active Configuration pull-down menu, and
DT-X11 Device
in the Device pull-down menu.
Figure 7.18
7.4.2 Debugging Applications
Basic Debug Operation
The debug operation used for the
Device Emulator
in both Visual Studio 2005 and eMbedded
Visual C++ 4.0 is the same as an ordinary debug operation using the actual terminal.
Debugging with the Device Emulator
With the
Device Emulator
, it is possible to set a break point in the source code of the application
for step-by-step debugging.
Содержание DT-X11M10E
Страница 16: ...16 Figure 2 2 Figure 2 3...
Страница 35: ...35 11 Now installing the driver is completed Figure 5 17...
