23
4.
Turn on the power. This causes the cradle’s power indicator lamp to light in red.
5.
Making sure that their IR ports come into contact with each other, place the terminal onto the
cradle. This causes the cradle’s power indicator lamp to light in green.
•
If the system is operating normally and communication is enabled, the system status
indicator lamp lights in green.
•
The communication indicator lamp flashes in green when communication starts.
6.
When charging is initiated, Indicator 2 (right side LED) on the DT-X11 lights up in red. When
charging has been completed, it changes its color from red to green.
Notes:
•
A high-sensitivity communication element is used for IR communication. In order to ensure
successful communication, avoid using cellular phones or other devices that emit radio wave in
the area where you are performing IR communication. If you need to use such a device, move
away from the terminals that are in communication. In case of a cellular phone, keep it at least
30cm (11
16
13
") away.
•
Take care to avoid allowing the cradle power contacts to become connected to each other, which
creates an electric short. Shorting the power contacts can damage the cradle.
Содержание DT-X11M10E
Страница 16: ...16 Figure 2 2 Figure 2 3...
Страница 35: ...35 11 Now installing the driver is completed Figure 5 17...
