Case Communications syncro 1496, Справочное руководство

Страница: 84 / 192

All dial backup configurations require one modem to be a master and one
modem to be a slave.
6.4.1 Single Call Dial Backup
This configuration will cause the modem to work as a full duplex 2-wire
link when operating on the PSTN.
The master modem will dial out on LINE 3 using the telephone number
stored in N8. The slave modem will answer an incoming call on LINE 3.
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
LINE 3
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
LINE 2
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
LINE 3
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
LINE 2
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
Master Modem
ATN8&Z <telephone number><CR>
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
Slave Modem
ATN8&Z <CR>
Example of Dial Backup Using Configuration Recall
With a modem operating in 4-wire leased line V.33 14400 bps mode with
dial backup enabled such as factory configuration 11, it is required that
transmission should be switched to V.32bis when the modem operates in
dial backup.
To achieve this the modem will have to alter its configuration from the one
that it is using on the leased line, to the preferred configuration on the
PSTN, during the time between the failure of the leased line and data
transmission over the PSTN.
We have already explained in Section 6.1.1 how <Ctrl-F> can be used to
store a modem configuration with a telephone number. By using this
powerful feature you can store the required V.32bis configuration together
with the backup telephone number in directory location N8 of the master
modem. When the modem goes into dial backup mode, it will dial the
number stored in N8 and automatically load the associated configuration.
The slave modem can only reply if it too has switched from the leased line
configuration to an appropriate PSTN configuration. Using
<Ctrl-F> ,
load the configuration into directory location N10 of the slave modem:
ATN10&Z<Ctrl-F> <Configuration No> Zn <CR>
where
n
is the user configuration number.
X450-310851 Issue 2 6-8 Rev.0