Carver 33 SUPER SPORT, Руководство пользователя

Страница: 82 / 164

I
NTERNAL
S
YSTEMS
3327 12/04
S
ECTION
4
4.3 Raw Water Washdown
The optional transom raw water washdown enables you to use seawater
to washdown and clean your boat.
To use the raw water washdown:
1. Locate the transom-mounted hose fitting, in the cockpit in the
port aft locker.
2. Attach one end of an appropriately sized garden hose to the hose
fitting.
3. Attach a nozzle to the other end of the hose. The best type of nozzle
to use is the “pistol grip” type that can be opened and closed by
squeezing your hand.
4. Make sure the raw water washdown seacock is closed. Remove and
clean the raw water washdown’s seawater strainer. The strainer
prevents debris in the seawater from entering the washdown pump.
The seacock, strainer and pump are located beneath a hatch in the
cockpit. Refer to 9.7.1 Hatches for the exact location of the seacock,
strainer and pump.
5. Reinstall the seawater strainer. If the strainer leaks when the raw
water washdown seacock is opened, close the seacock, then check
the strainer for correct installation.
6. Open the washdown seacock to supply seawater to the washdown
pump.
7. On the Safety Breaker Panel:
a. Turn the “house” battery master disconnect switch to the “ON”
position.
b. Switch the Main - One circuit breaker “ON.”
Do not operate the washdown pump when the seacock that supplies
seawater to the washdown system is closed. Operating the pump with no
seawater can damage it.
8. On the DC Control Center, switch the Main circuit breaker “ON,”
then switch the Washdown Pump circuit breaker “ON.” This acti-
vates the boat’s raw water washdown pump.
Open Closed