Carver 33 SUPER SPORT, Руководство пользователя

Страница: 47 / 164

3327 12/04
DC E
LECTRICAL
S
YSTEM
S
ECTION
2
2.2.2.9 Exterior Lights
This breaker controls the flow of electricity to the switch for the cockpit
and bridge lights. This switch is located in the cockpit next to the star-
board side deck stairway. To supply power to the switch, switch this
breaker “ON.”
2.2.2.10 Bilge Blower (1 - 2)
These two breakers control the flow of electricity to the Bilge Blower
switch at the helm and on the DC Control Center. To supply power to
these switches, switch these breakers “ON.” Use the Bilge Blower switch
to manually operate the bilge blowers. The bilge blowers also operate
automatically when the starboard engine ignition switch is turned ON.
2.2.2.11 Forward TV
This breaker controls the flow of electricity to the optional stateroom TV.
To supply power to the TV, switch this breaker “ON.” Refer to the OEM
information for details on operating the TV.
2.2.2.12 DVD Player Aft
This breaker controls the flow of electricity to the optional salon DVD.
To supply power to the DVD, switch this breaker “ON.” Refer to the
OEM information for details on operating the DVD.
2.2.2.13 Water Pump
This breaker controls the flow of electricity to the fresh water system’s
pressure water pump. After the fresh water tank is filled, switch this
breaker “ON” to activate the pressure water pump. Refer to 4.2.2 Pres-
surizing and Priming the Water System for information on using the
pressure water pump to fill and prime the water system.
2.2.2.14 Waste Pump
This breaker controls the flow of electricity to the pump switch for the
optional overboard discharge system. Use the pump to empty the waste
tank directly overboard. To supply power to the switch, switch this
breaker “ON.” Refer to 4.5.2.2 Overboard Discharge for information on
using the pump.
2.2.2.15 Washdown Pump
This breaker controls the flow of electricity to the pump for the optional
raw water washdown system. To activate the washdown pump, switch
this breaker “ON.” When you are finished using the washdown, turn the
washdown pump off by switching this breaker “OFF.” Refer to 4.3 Raw
Water Washdown for information on using the washdown.