Carver 33 SUPER SPORT, Руководство пользователя

Страница: 49 / 164

3327 12/04
DC E
LECTRICAL
S
YSTEM
S
ECTION
2
The refrigerator automatically uses AC power whenever your boat is
connected to a shore power source or the generator is operating, and the
Receptacles Galley circuit breaker on the AC Control Center is “ON.”
Refer to the OEM information for details on operating the refrigerator.
2.2.2.23 Stereo
This breaker controls the flow of electricity to the stereo in the salon. To
supply power to the stereo, switch this breaker “ON.” Refer to the OEM
information for details on operating the stereo.
2.2.2.24 Electric Head
This breaker controls the flow of electricity to the electric pump for the
toilet. Switch this breaker “ON” to enable the pump. Refer to 4.5.1 Toi-
let and the OEM information for details on operating the toilet.
2.2.2.25 Spare
These breakers are reserved for aftermarket accessories you install on
your boat.
2.2.3 Bridge Breaker Panel
The Bridge Breaker Panel, located in a cabinet next to the bridge helm
seat, protects the circuitry between the DC Control Center and optional
navigational equipment installed at the helm. The circuit breakers on
this panel are normally “ON” and cannot be manually switched “OFF.” To
reset a tripped breaker, press its button. To provide power to this
breaker panel:
1. Turn the “house” battery master disconnect switch to the “ON”
position.
2. On the Safety Breaker Panel, switch the Main - Two circuit breaker
“ON.”
The Bridge Breaker Panel contains the circuit breakers described on the
following pages.
2.2.3.1 Bridge VHF Radio
This breaker controls the flow of electricity to the optional VHF radio.
Refer to the OEM information for details on operating the radio.
2.2.3.2 GPS/Plotter
This breaker controls the flow of electricity to the optional global posi-
tioning system and chart plotter. Refer to the OEM information for
details on operating the GPS and chart plotter.