111
3237 • X6 02/2018
OWNER’S MANUAL
SYSTEM OPERATING INFORMATION
7
TIP
The waste deck plate is not connected to the fitting and
does not float. Be careful not to drop the deck plate
when removing. You can order a replacement from your
dealer if you do lose the plate. Waste deck plates are
dropped overboard frequently enough that we suggest
you carry an extra plate in your onboard spare parts kit.
The waste system must be empty during storage at
freezing temperatures.
NOTICE
Waste Tank/Gray Water Tank
Deodorizers and Acceptable Cleaning
Chemicals
Any RV tank cleaner, RV anti-freeze, or RV deodorizer
is acceptable for use with the waste tank or gray water
tank.
Overboard Discharge (Optional)
1 ]
Open the overboard discharge seacock.
2 ]
If a gray water tank is installed, make sure the
Y-valve is set to the correct position. The Y-valve
allocates the WASTE tank or GRAY WATER tank to
be emptied.
3 ]
Turn the ACCESSORY battery master disconnect
switch to the ON position. The ACCESSORY
master disconnect switch is located on the DC
control center.
4 ]
On the DC control center, switch the SYSTEMS
DC MAIN circuit breaker ON, and then switch the
WASTE PUMP circuit breaker ON.
5 ]
Turn the WASTE PUMP switch ON located on the
DC control center. This activates the overboard
discharge pump, which pumps the waste
overboard.
When the waste tank is empty, turn the WASTE PUMP
switch OFF. Operating the pump when the waste tank is
empty can damage the pump.
NOTICE
6 ]
After all waste is pumped overboard, turn the
WASTE PUMP switch OFF.
7 ]
Remove the waste tank deck plate labeled
“WASTE” using the waste tank deck key supplied
with the yacht.
8 ]
Flush the waste tank by pouring at least 3 gal (11 L)
of freshwater through the “WASTE” deck fitting.
9 ]
Reactivate the overboard discharge pump and
remove the freshwater and any remaining waste,
and then turn the pump switch OFF.
10 ]
Close the overboard discharge seacock.
11 ]
Replace the “WASTE” deck plate.
12 ]
On the DC control center, switch the WASTE
PUMP circuit breaker OFF.
Propulsion System
Never allow flammable materials to contact hot
propulsion parts. Fire and explosion may occur.
WARNING
!
The Propulsion System covers the standard factory
installed gas engines and any options within the
propulsion system.
C34_Coupe.indb 111
2/8/2018 3:43:23 PM
Содержание C34 Coupe 2018
