Carter Talon 150 DLX Series, Руководство по обслуживанию

Страница: 63 / 81

59
PRIMARY COIL INSPECTION
When the inspection work is done on the engine there is no need to remove the generator.
• Remove the 4- core connector of the generator.
• Measure the resistance value between the white wires of the generator and connecting wire of
the vehicle body.
Standard value 0.2 ~ 0.4 Ω (20°C)
When the actual value is more than the standard value, the coil should be replaced.
GENERATOR REMOVAL AND INSPECTION
GENERATOR REMOVAL
• Remove the cooling fan cover bolt and screw.
• Remove the cooling fan cover.
• Remove the cooling fan bolt, and remove the cooling fan.
• Hold the flywheel with a universal holding wrench, at the same
time remove the flywheel nut.
• Remove the flywheel with a flywheel puller, and remove the
solid key.